skip to content

Equipment for fish processing

Equipment for fish processing - Made in Germany

 


Fish skinning machine, mod. Skinex S 460

Best possible machine for skinning of fish with soft or thin skin. Equipped with tooth roller and cleaning roller as well as a water cleaning unit.

Fish Skinning Machine

  • Cutting width: 430 mm
  • Cutting effect: 20 m/min.

Watch video


Fish skinning machine, mod. Cortex CBF 495

Automatic skinning of fish with very little loss, equipped with a tooth roller and cleaning roller as well as a water cleaning unit. Tooth roller with rough or medium toothing, pressure roller to be chosen according to type of fish to be treated. Deep skinning possible.

  • Fish Skinning Machine
  • Cutting width: 430 mm
  • Cutting effect: 19 m/min.
  • Through pass: 90 mm

Watch video


Fish skinning machine, mod. Skinex SB 495-T for tilapia

Double lane skinning machine for tilapia. For automatic and precise skinning of up to 480 fillets per minute, equipped with a tooth roller and cleaning roller as well as a water cleaning unit.

  • Cutting width: 2 x 200 mm
  • Capacity: up to 480 fillets / min.

Watch video

 


Separators

Various machines available for the small business and for industrial use

  • Capacity from 500 up to 10,000 kg/h

The unprocessed meat is conveyed to the perforated stainless steel cylinder by a flexible and highly wear-resistant polyurethane crusher belt. The uniformly increasing pressure forcing the soft meat through the perforations into the cylinder while the larger and firmer parts (bones, sinews, tendons, cartilage, etc.) are held back on the outside of the cylinder and removed by scrapers.

The separated meat maintains its natural fibre structure because it is not grated, ground or heated in any way !

Separator for  universal use.


Fish skining machine , mod. Cortex CB 495/7T SALMON-TWIN

The Cortex CBF 495 SALMON is the perfect machine for plants processing mainly salmon. It is provided with a scraper comb, which cuts in the grooves of the tooth rolller as well as a water cleaning unit in order to keep the machine clean during operation. Double lane machine with double capacity.

 

Salmon Fish Slicer Machine Twin

  • Cutting width: 2 x 300 mm
  • Cutting effect: 19 m / min.
  • Maximun processing hight: 90 mm

Slicer, mod. Cortex CB 495/4 and CB 495/7

With conveyor belt for supply and for removal for efficient, gentle cutting of slices or stripes of fish. Distance of blades to be indicated with the order (preferential distances: 8,12,16,24,32 mm). The machine cannot be used for cutting frozen products or fish with bones.

Fish Slicer Machine
  • Cutting width: 370 mm / 600 mm
  • Diameter of blades: 200 mm / 300 mm
  • Cutting effect: 15 m/min. / 19 m/min.

Fish skinning machine, CF 420 and S 420

Small open table top fish skinning machine for supermarkets fish stores, restaurants

Table Fish Skinner

  • Cutting width: 300 mm
  • Cutting effect: 20 m/min.

Gutting machine 750

The new gutting machine 750 is suitable for productions wanting a quick, good, and uniform gutting of the fish. The gutting machine 750 can gut up to 40 fish per minute when it has been adjusted. With the gutting machine 750 you only have to think of feeding the machine with fish. The machine is simply constructed so that it is easy to adjust and maintain. Maintenance cost is minimal, and all wearing parts can be bought off-the-shelf.


Sorting and weighing machines

  • 0.2 to 15 tons/hr.
  • Manual or automatic
  • Live or dead fish
  • Fillets or whole fish
Copyright 2011